- Areas and volumes
- Diagram multiplication
- Linear algebra
- Polynomial roots
- Function interpolation
- Advanced calculator ESPRI

- Parametric sections
- Parametric thin-walled sections
- Separate sections as single unit
- Moment of inertia in torsion

- Continuous beam
- Influence lines in continuous beam
- Truss
- Parametric plane frame
- Arbitrary plane frame
- Rectangular slab on elastic foundation
- Rectangular slab
- Wall-beam
- Shell on rectangular plan
- Shell on circle plan
- Mode shapes and frequencies of natural vibrations in cantilever
- Stability factors and buckling modes in cantilever
- Mode shapes and frequencies of natural vibrations in continuous beam
- Cable and string

- Steel table
- Analysis of steel elements
- Principal and equivalent stresses in steel structures
- Effective lengths of steel structure elements
- Parametric joints of steel structures
- Cold-formed shapes

- Properties of concrete
- Table of reinforcement
- Anchorage of reinforcement by DSTU 3760-98
- Sections of reinforced concrete (RC) elements
- Reinforced concrete (RC) shell
- Reinforced concrete (RC) wall-beam
- Reinforced concrete (RC) slab
- Principal and equivalent stresses
- Strengthening with composite materials
- Strength of RC connection in shear
- Concrete sections with fiber-reinforced polymer (FRP) bars
- Concrete pipe sections

- Design compression strength in brickwork
- Brick pier
- Brickwork in local compression
- Brick pier in tension
- Brick pier by DBN V.2.6-162:2010

- Solid sections (SNIP II-25-80)
- Glued sections (SNIP II-25-80)
- Composite sections (SNIP II-25-80)
- Solid sections (Eurocode 5)
- Glued sections (Eurocode 5)
- Composite sections (Eurocode 5)

- Moduli of subgrade reaction C1, C2
- Single pile
- Pile under combined action of loads
- Settlement of equivalent footing
- Principal and equivalent stresses in soil
- Slope stability
- Stability of multi-layer slope
- Bearing capacity of piles by field test results

- Load factors
- Dead weight of multi-layer coating
- Snow loads
- Wind loads
- Ice loads
- Climatic thermal loads
- Hazardous energy combinations of forces (EnergyCF)
- Resonance check for wind turbulence

- Analysis of inelastic deflections

- Bearing capacity of reinforced concrete elements

- Sheet piling

- Strength of RC diaphragm in earthquake loads

- Punching shear for arbitrary contour
- Punching shear for rectangular contour

- Thin-walled bar systems

- Prestressing
- Analysis of RC support sections (posts)

- Moduli C1 and C2 according to soil model